Close

Site Information

 Loading... Please wait...
  • Image 1
  • SMA8-A Front Chassis -
  • SMA8-A Rear Chassis
  • SMA8-A Top Chassis
  • SMA8-A Bottom Chassis (solid floor with light strip lighting mounts shown)
  • SMA8-A Chassis Divider (ATX form factor shown). Includes cable clamps, grommets and motherboard tray guide rails.
  • SMA8-A Mod-Chassis (solid version shown)

SMA8-A Replacement Chassis Sections (pricing varies)

$39.95
Shipping:
Calculated at checkout
Quantity:

Product Description

 Replacement MAGNUM SMA8 A Revision (SMA8-A) Chassis Sections. Feel free to cut, drill and replace chassis sections as needed without worry of ruining your case. Each chassis section can be purchase individually as part of our "mod-friendly" design. Chassis sections do not include any retention clips, covers or any other joining parts. Chassis Dividers do include new u-channel around the cable management holes as well as motherboard tray rails.

 

MAGNUM SMA8 and SMA8 A Revision (SMA8-A) parts compatibility
Part

Status when adding SMA8-A part to a SMA8

Notes
Bottom Chassis Interchangeable Will also fit the STH10 and SMH10
Mid-Chassis Interchangeable Will also fit the STH10 and SMH10
Rear Chassis Interchangeable** **The PSU mounting pattern shifted down about 1/4" (6.5mm). The mounting hole pattern for the lower radiator side mount is off-set by about 1/5" (5mm) (either up or down depending on which position you are currently using. If you are using the upper most position then the mount will be shifted downward, and vice versa if you are using the lower position. Older style Single Wide MAGNUM radiator side mounts will work with the SMA8-A rear chassis, but you are unable to utilize the "drop-in" feature. When adding the SMA8-A rear Chassis to your SMA8, it is required to also add the SMA8-A front chassis to make use of the radiator side mounts or HDD side mount. 
Top Chassis Interchangeable** **The SMA8-A top "drop-in" chassis is not included with the radiator mount, it must be purchased separately.  The 120.4 (480) mounting pattern is shifted laterally by about 1/5" (5mm) closer to the window. The light strip mount will not work with the SMA8 chassis divider when used with the SMA8-A top chassis. It would be possible to drill your own mounting holes into the divider with novice to intermediate "modding" ability. 
Front Chassis Interchangeable** **Requires SMA8-A Front Cover and  SMA8-A switch assembly (switches are the same). 3.5" device cage is no longer functional.  The mounting hole pattern for the lower radiator side mount is off-set by about 1/5" (5mm) (either up or down depending on which position you are currently using. If you are using the upper most position then the mount will be shifted downward, and vice versa if you are using the lower position.) Older style Single Wide MAGNUM radiator side mounts will work with the SMA8-A rear chassis, but you are unable to utilize the "drop-in" feature. When adding the SMA8-A Front Chassis to your SMA8, it is required to also add the SMA8-A rear chassis to make use of the radiator side mounts or HDD side mount. 
Chassis Divider Interchangeable** ** Requires SMA8-A HDD Cages and reservoir mount (if they are to be used). Motherboard tray guides rails and cable clamps included. Top vertical cable management hole shifted downward 1/2" (13mm). The cable side door had its handle moved slightly closer to the front of the case due to minor interference when a 3.5" drive is mounted in the center cage closest to the door. 
Motherboard Side Door Interchangeable Will also fit STH10 and SMH10 
Cable Side Door Interchangeable**  **The cable side door had its handle moved slightly closer to the front of the case due to minor interference when a 3.5" drive is mounted in the center cage closest to the door when using the SMA8-A Chassis Divider
Top Cover Interchangeable Will also fit the STH10 and SMH10
Front Covers NOT Interchangeable  
Lower Side Cover Interchangeable Will also fit the STH10 and SMH10
Motherboard tray and backplate Interchangeable Will also fit the M8 and M8A cases
PCIE Backplate Interchangeable Will also fit the M8 and M8A cases
Reservoir Mounts NOT Interchangeable  
Lower Radiator and HDD Side Mounts NOT Interchangeable** While the SMA8-A radiator side mount will not fit the  SMA8 and STH10, the gen 1 Single Wide Radiator Side Mounts and HDD side mount will fit in the SMA8-A. Same holds true for the Single Wide MAGNUM Pedestal (new mounts won't fit in the old pedestal, but the old mounts fit in the new pedestal).
Luminous Panel  NOT interchangeable** To be technical, the Luminous Panel does not fit perfectly in the older Single Wide MAGNUM cases. However, the only reason why is because of the bottom dome head rivet that holds the divider stiffener in place. With a small amount of force and/or a minor amount of filing with a round hand file, the light panel will fit. Proceed with caution and at your own risk. CaseLabs will not be responsible for damaged light panels which have been modified or forced to fit in older cases.
Light Strip Mounting Bars Interchangeable Will also fit the STH10 and SMH10

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category