CaseLabs PSU cover plates. These will also fit most other non-CaseLabs PSU openings. Mounting hardware is included and three styles are available:
- Tubing Management
The Tubing Management Cover is included with plugs to seal the holes when not in use.
Customers also viewed
Posted by Benny Lam on 29th Jan 2018
Great for additional air flow
Posted by Benny Lam on 25th Jan 2018
great airflow for the cover plate
Mandatory for use with a 560 side rad
Posted by Jubijub on 22nd Jul 2017
I used this in the lower chamber of the SMA8. By default the case ships with a plain cover, so the ventilated cover allows a nicer flow for the fan closest to the rear.
Mounting is super easy, same 4 screws as any PSU / PSU cover.
Posted by Richard on 6th Feb 2017
Not a lot to explain here. If you're looking for ventilation in the lower chamber then get this. Build quality is fantastic, just like the rest of the pieces from CL. If you plan a 560mm rad in the bottom be aware that your PSU will block airflow for at least one fan. Having this will help that air escape.
Just what I needed, Should Have Gotten It Sooner
Posted by Xerxes Baldonasa on 20th Jun 2016
This was install on the top of the case so that it can help hot air escape faster since heat rises to the top. Quality is good as usual from CaseLabs.
Just what I needed
Posted by Al on 5th Apr 2016
I have the 560 radiator in the bottom chamber of the STHIO along with the PSU and PSU plate. The psu and plate blocks one of the fans ability to blow air directly out the back of the case, so I wanted to add ventilation that allows the air to easily escape around the psu plate. This was the solution.
Posted by Ixander on 23rd Dec 2012
Great if you want more ventilation for your case.