Site Information

 Loading... Please wait...
  • SMH10 - XL Window and Ventilated Covers
  • With Solid Side Cover
  • Image 3
  • Image 4
  • With User Supplied I/O Panel in 3.5" bay
  • 120mm Extended Ventilated Top Cover
  • Integrated 480 Mount on Top and Optional 560 Mount on the Bottom
  • Image 8
  • Image 9
  • Slide-Out MB Tray
  • With MB Cover Plate (Part of the Included Tech Station Kit)
  • With MB Cover Plate Removed
  • Ventilated MB Door
  • Solid MB Door
  • XL Window
  • XXL Window
  • Image 17
  • Silverstone USB 3.0 device installed in the 3.5'' cage.
  • Shown with 120.3 fan hole mid-plate and cut-out bottom chassis section
  • Shown with solid mid-plate and solid bottom chassis section
  • PCI Backplate  -   Hex-Mesh (left)   Fan Hole (right)
  • Color Options


Calculated at checkout
Use to specify two tone color scheme if selected :

Product Description

***This case will be discontinued December 31, 2014***


Have a question? Just email us at

Important Please Read:

If you are unable to retrieve a shipping quote for your country please click here**

* If the two tone option is selected, please specify which parts of the case are to be painted with each color. It is okay to specify the parts for one color with the assumption that the remaining parts are to be the other color.

* The SMH10 is only available “flat-packed” (unassembled) unless local pickup (will call) is selected. If will call is selected, and you want the case assembled, please make the request in the order comments. 

* Radiator mounts for the lower chamber are not included.

MAGNUM SMH10 Case Features: (click the links below for full desrciptions)                                                                   



Size  25.75"H x 26.56"D x 11.25"W (654mm x 675mm x 286mm)  Both XL-ATX and HPTX form factors are available (exterior case dimensions are the same).
Clearance Above/Below The MB Tray  42mm
Middle Chamber Dimensions (from the frame, door adds .5'' (12.7mm) to the width) 17.44"(443mm) x 26.00"(660mm) x 7.60"(193mm)
Lower Chamber Dimensions (from the frame, side covers add.5'' (12.7mm) to each side
 9.70"(246mm) x 26.00"(660mm) x 7.41"(188mm)
Clearance behind The MB Tray  2.65'' (67mm)
PCI Slots  10
Form Factor  XL-ATX (mATX, ATX, **E-ATX, SSI-CEB, XL-ATX. MB tray dimension: 13.60” x 10.75”) or HPTX  (mATX, ATX, SSI-CEB, XL-ATX, EATX, SSI-EEB, HPTX. MB tray dimension 13.60" x 15.00” - 346mm x 381mm)
Top Fan/Radiator Mount  120.4 (480)
Maximum radiator size under 120mm extended top cover  120.4 (480)
Maximum radiator size - lower chamber (On either side)
 140.4 (560)
Maximum radiator size with PSU - lower chamber (On either side)  120.3 (360)
Span between installed radiator mounts in either chamber (In a push/pull configuration, one bank of 25mm thick fans sits on the outside of the radiator mount, and is irrelevant when calculating radiator fitments)  8.5'' (217mm)
Cooling Tower Clearance  180mm

Mid-Plate Fan Mounts

 120mm x 3
Number of Flex-Bays (5.25'' bays)  13
Number of 3.5'' bays
Native HDD Capacity  2 (18 Using Optional MAC-102 HDD Cages)
Native SSD Capacity  4 (40 using Optional MAC-102 HDD Cages and MAC-124 SSD mounts)

 27 lbs (12.25 kg)

PSU locations  2

Note: Exterior dimensions shown are for the case only. Rubber feet add .75’’ (19mm) to height, optional standard casters add 2.6’’ (67mm) and HD Casters add 3’’ (76mm)

 ** "E-ATX" motherboards such as the ASUS RAMPAGE V EXTREME will fit in this case with the XL-ATX option. E-ATX motherboards such as the Supermicro H8DG6 will not fit in this case with the XL-ATX option. Please cross reference the motherboard tray size with the motherboard dimensions from the manufacturer.


Standard and Optional Case Features and Accessories:


Standard Features and Options Optional upgrades
Top Cover  Ventilated or Solid  39 mm Ventilated or 120mm Ventilated

Motherboard Door

 Solid or Ventilated  XL Window or XXL Window
Lower Cooling Chamber Covers  Solid or Ventilated (One of each avalible upon request)  NA
Rear Fan Mount  120mm Hex-Mesh or 120mm with 4 x 40mm Fan Holes (cover plate included for the 4 x 40mm fan holes)   NA
PSU covers  1  NA
PCI Covers  10  NA
 3 Triple Bay Covers, 1 Double Bay Cover and 2 Single Bay Covers - Solid
 3 Triple Bay Covers, 1 Double Bay Cover and 2 Single Bay Covers - Ventilated
Flex-Bay 5.25 mounts  4 sets of Standard Mounts (MAC-125) no substitutions  NA
MISC Hardware Motherboard Tray Handle, HDD/SSD hardware kit, MB standoff kit, Cable Ties, Spare Parts kit, Rubber Case Feet and 5/16'' nut driver for drive cages.
Case Color  Black or Primer Gray (Primer Gray is not a cosmetic Finish)  White, Gunmetal or Two Tone
Case Orientation  Standard or Reverse

The SMH10 was designed without a fixed I/O panel for the front. Instead, we created a 3.5'' bay mount directly under the switches. Now you have the freedom to have any type I/O panel you like or none at all! The switch assembly includes two switch plates, a solid version and one with a cut-out for your 3.5'' device.

We offer this 3.5'' device wih USB and HD audio. We can even color match it to your CaseLabs case!




Product Reviews

Write Review

Showing reviews 1-10 of 12 | Next

  1. There are no words...

    Posted by Ruck on 8th Mar 2014

    It's beautiful, just beautiful. I was considering the STH10, but I am glad I settled for the SMH10, because I didn't necessarily need the extra chamber at the top.IMO, this is the most aesthetically pleasing CaseLab case. I love how well balanced this case looks, while having a separate lower chamber to house your power supply, radiators or whatever you need it for.

    Packaging is unbelievable. Everything comes flat packed and individually wrapped almost air tight. I have shopped for a lot of things from a lot of places online and I have never seen packaging this well. You can assure that your case will arrive safely, and if something is damaged, customer support will take care of you on the spot.

    The absolute best part of owning a CaseLabs case, is when you are assembling all the pieces together. You can see the amazing quality first hand and gain a appreciation for the hard workers at CaseLabs who custom make your order individually by hand.

    CaseLabs quality construction is second to none. I chose to reverse my motherboard form factor as it will give you clearance to mount a 60mm thick 480mm radiator as the top if you are using a standard ATX or some EATX motherboards. You couldn't mount a 60mm radiator using the standard option - but with the release of the SMA8, you easily can with that case.

    All in all, I am so very happy with this case. I can't wait to fill it up with components that I know I will change out once a year or every other year lol. The only thing that won't be changing is my beautiful CaseLabs Magnum SMH10.

  2. Beautiful Case

    Posted by Learie on 1st Feb 2014

    Went from Lian Li to the SMH10. Not going back.

    Was not too difficult to put together.

    All parts, precise fit. A work of art, so well design. The SMH10 is a winner.

    It's such a shame that I have to drill a couple of holes for the res. in my water cooling setup.

  3. Worth the money

    Posted by Mitchell on 1st Nov 2013

    I, like many was hesitant to spend this much on a case, but after years of of owning "high end" full towers and super towers, I now have no regrets about buying this case. The build quality is top notch, counter sunk screws, thick aluminum, and a wonderful powder coated finish. Once built the case is very solid, does not creak or flex like many factory cases made of multiple materials (steel, plastic, aluminum).

    Yes, you'll spend more, but your not just buying another case, your investing in a case that will last for years, because, as many have stated in previous reviews, caselabs has all the brackets and accessories to fit your current build and many more builds.

    The customer service is arguably some of the best out there,
    from answering questions to resolving problems. I seen them send photos to people asking for comparisons of components in cases, or even photos of their cases in the build stage. Find another company to go out of their way like that.

    All in all, great case and great company.

  4. Extremely Well Built Case

    Posted by Nish on 7th Oct 2013

    The Magnum SMH10 I purchased from Caselabs lived up to my expectations from the reviews I had read on many sites. The construction of the case is perfect. Everything fits and it's very solid.

    I was surprised how big it was being it was the smaller version of the Magnum but I don't mind it just leaves me wondering what kinds of things I'd like to do with it.

    I had one issue with a few screws missing, contacted Caselabs, and was immediately sent out a replacement pack of screws. The funny thing was, they give you so many extra screws, I didn't even need them. They responded first showing me how I could use other screws in their place and everything looked great and works perfectly fine.

    Otherwise, it might be hard to justify for some and because I'm not a rich guy, but I can definitely say that I'll be very happy to keep and use this case for the next 5-7 years at least if not longer. Also, the fact that it's not a made in China product with blueprints being shipped out and whatever comes back comes back makes me feel better. I can always contact Caselabs with any issues or for parts to modify my case.

    All in all, not a cheap case but I do not regret the purchase a bit. Just make sure you measure the size of what you plan on getting before you order =D


  5. Why even hesitate?

    Posted by Tim Ayers on 20th Jul 2013

    Alright, so I got the case today, ripped it out of the box and got it together. The construction of the case is flawless, it's amazing, and precise. Plenty of space to fit a RIVE, and dual/tri 7970's. I can't wait to get this either put together completely, or mod it lightly. I probably won't mod it, because it's so freaking perfect.

    Anyways, despite the price- get it, you'll never really have another reason to get an average, factory case again, but buy another CL case!

  6. Excellent build, horrible manuel

    Posted by Alex tan on 26th Jun 2013

    This case is a joy to build but only if you are use to building your own stuff, the Manuel that comes with it is next to useless, need more work on that part. Sale service is excellent although the ordering interface could use more detail, package delivered on time(to Singapore no less) and without any scratch, kuddo! to caselabs.
    FYI, my pc interior drop 20 degress and my over clocked 4.6ghz cpu never go above 60 degree, this case is a must have for people that love building and tinkering with their personal pc

  7. The case!

    Posted by Alberto Gotta on 5th Jun 2013

    Case superlative, exceptional quality materials, spacious and well-built, all pezi are assembled with amazing accuracy, good case for liquid cooling system, the best from me owned. Also the guys at caselabs have followed me during configuration and well recommended.

  8. Amazing Quality

    Posted by Brad on 6th May 2013

    These cases cost more than most, but you pay for quality. The powder coating finish looks really good. The SMH10 can easily house more than enough radiators for an overclocked CPU and 4 GPUs. There are so many features, and you don't have to use them all, only the ones you want. In my opinion the quality is something you need to see in person. I read a lot of good things and looked at a lot of pictures, but I was still amazed when it arrived. It's a really great case.

  9. Amazing Case

    Posted by Zach on 3rd Apr 2013

    When I first saw a Case Labs case I thought: "That's insane, too much for a case." After two "Full Towers" proved to not have enough features for my, admittedly high, standards I found Case Labs again and saw this case. My first thought was still "That's insane, too much for a case...But..." I started to think maybe it would be worth it to spend the money to get an obviously high quality case that could be used for future upgrades and builds. I wanted the SMH10 since it seemed to be the perfect size, but I couldn't find very many user pictures of it so I was hesitant to pull the trigger. I finally decided to and let me tell you something: Absolutely worth every penny!

    I love everything about the case; the two compartments mean I don't have to worry about air leaking from the radiators onto components, the ability to do an rATX configuration means I can see my current trophy (GTX 690), there's tons of radiator space, but above everything else my favorite feature is the removable motherboard tray. It's gimmicky until you use it, and it makes installing components a breeze.

    Buy this case, or any Case Labs case, I promise you won't regret it.

  10. Impeccable quality

    Posted by Al on 24th Mar 2013

    This is a beautifully crafted case, thoughtfully designed, and precisely manufactured. I personally feel that the investment expectations that accompanied the cost of this case were eclipsed. The build options are plentiful, and the attention to detail abounds in every facet of the manufacturing.

Showing reviews 1-10 of 12 | Next

Find Similar Products by Category