Close

Site Information

 Loading... Please wait...
  • Image 1
  • Ventilated MB Door - Standard Case
  • Ventilated PSU Door - Standard Case
  • Rear view with fan hole option
  • MB Interior View
  • PSU Interior View
  • Standard and Reverse Front View
  • Top View with Ventilated Cover
  • Top View Showing Integrated Radiator Mounts
  • Bottom View Showing Integrated Radiator/Fan Mounts
  • XL Window in Gray
  • Solid Panels
  • Standard Ventilated Top Cover
  • 31mm Extended Top Cover
  • 85mm Extended Top Cover
  • HDD Cage Options: MAC-102 Flex-Bay Mount (left) and MAC-101 Standard Mount (right)
  • PCI Backplate  -   Hex-Mesh (left)   Fan Hole (right)
  • Color Options

MAGNUM M8 Case

$419.95
SKU:
MM8
Shipping:
Calculated at checkout
Use to specify two tone color scheme if selected :
Quantity:

Product Description

Have a question? Just email us at cs@caselabs.net

**Important Please Read**

* For orders outside of the United States, please click here.

* If the two tone option is selected, please specify the color scheme in the order comments section at the end of the ordering process. The case can be powder coated in almost any color scheme, but each part can only be powder coated one color.

* The fan holes on the front of the PSU side are not spaced for a radiator. They are spaced farther apart to accommodate the HDD cages.

Case Features:

All Aluminum Construction
The Flex-Bay System
The Accessory Mounting System
Integrated Horizontal Radiator Mounting
Dual Chamber Construction
Quick Release Exterior
Anti-Vandal Switches with Black MDPC-X Sleeved Cables
Removable Motherboard Tray and Mini Tech Station

Technical:

Form Factor  mATX, ATX, **E-ATX, SSI-CEB   MB tray dimensions: 12.0" x 10.75” (305mm x 273mm)
Expansion Slots  8
Number of Flex-Bays (5.25'' bays)  10
Native HDD Capacity  4 (24 maximum with added HDD cages)
Native SSD Capacity  0 (48 maximum with added HDD cages and SSD mounts) 
PSU Locations  2
Total Number of Native 120mm Fan Mounts  16
Total Number of Native 140mm Fan Mounts  0
Weight  19lb (8.6kg
Maximum Radiator Size  120.3 (360)
Clearance Above the Motherboard Tray  3.9’’ (100mm)
Clearance Below the Motherboard Tray 2’’ (52mm)
Cooling Tower Clearance  7’’ (180mm)
Internal Dimensions of the Motherboard Side Chamber  19.4’’ (494mm) / Height: 18.4’’ (468mm) / Width: 7.6’’ (194mm)  
Internal Dimensions of the PSU Side Chamber  Depth: 19.4’’ (494mm) / Height: 18.4’’ (468mm) / Width: 5.6’’ (143mm)  
Overall Exterior Dimensions  Depth: 20’’ (510mm) / Height: 19’’ (484mm) / Width: 15’’ (381mm)  

Note: Exterior dimensions shown are for the case only. Rubber feet add .75’’ (19mm) to height, optional standard casters add 2.6’’ (67mm) and HD Casters add 3’’ (76mm)

** "E-ATX" motherboards such as the; ASUS RAMPAGE IV EXTREME, ASUS MAXIMUS V FORMULA/THUNDERFX and EVGA Z87 Classified will fit in this case. E-ATX motherboards such as the; Supermicro X7DAE will not fit in this case. Please cross reference the motherboard tray size with the motherboard dimensions from the manufacturer. If the dimensions of the motherboard are within the dimensions of the tray, it will fit.

 

Standard and Optional Case Features and Accessories:

 

Standard Features and Options

Optional upgrades

Case Color Black or Primer Gray           White, Gunmetal or Two Tone 
ATX Layout  Standard                        Reverse 
Motherboard Side Door  Solid or Ventilated           Standard Window or XL Window (clear or gray acrylic)
PSU Side Door  Solid or Ventilated          Standard Window or XL Window (clear or gray acrylic)
Top Cover Standard Ventilated or Standard Solid 31mm Extended Ventilated, 85mm Extended Ventilated or 120mm Extended Ventilated 
Switch Assembly Anti-Vandal Power/Reset switches with black MDPC-X sleeved cables or no switch or cables (subtract $20.00) NA
I/O Panel         None           

USB 3.0 and HD Audio or USB 2.0 HD audio/Firewire

PCI Back Plate Style 120mm hex-mesh or 120mm fan hole and 3 x 40mm fan holes (single cover plate included for 40mm fan holes) NA
HDD Cage Type   Standard style (MAC-101) or Flex-Bay (5.25’’ bay) style (MAC-102)              NA
Flex-Bay (5.25’’ bay) Configurations 

2 single bay, 1 double bay and 2 triple bay covers (solid) 

Note; Choosing the Flex-Bay HDD cage as the default drive cage will eliminate 1 triple bay cover.

2 single bay, 1 double bay and 2 triple bay covers (ventilated) 

Note; Choosing the Flex-Bay HDD cage as the default drive cage will eliminate 1 triple bay cover.

MISC Hardware  motherboard tray handle, rubber case feet, motherboard standoffs, HDD mounting hardware, exterior grommets and cable tie wraps, interior grommets, spare parts kit, mini tech station feet and 4 sets of Standard 5.25’’ Flex-Bay brackets (MAC-125)
NA

 

 

Product Reviews

Write Review

Showing reviews 1-10 of 31 | Next

  1. Outstanding Quality!

    Posted by Leo on 15th Apr 2014

    I opened the box as soon as it arrived. You will not mind the plainness of the packaging because you will definitely be happy with the quality of the packaging. The packaging is top notch. The box was thick and they surround the case with thick square foams(about 1 1/4thick foam i think) to protect it through the rough journey and bumps .. The case was in a thick, high quality plastic that was artistically wrapped to prevent scratches. That was just the packaging...

    Upon inspecting the case, it's indeed true that it was made with details in mind. The thickness of the aluminum, the powder coat paint and the design of the case really is vomiting/spitting quality all around. I ordered my M8 White and the matte finish with added black tone was indeed a beauty in my eyes. Further looking up inside, even the smallest details, from the grommets and screws speaks of very high quality craftsmanship.

    The only thing i regret is that "I doubted ordering" because of the price. Shipping price is reasonable and is pretty fast (BTW i live in Philippines, so basically, shipping cost me a lot but it was worth it.). Every bit of dollar was well spent.

    Caselabs is a league of its own and you definitely can't compare them to other high end cases out there. The functionality, longetivity and modular design is what made me pick this case.

    I'm now a proud owner of a CASELABS case!

  2. Amazing

    Posted by Steve on 21st Mar 2014

    Seriously an amazing product. The fitment and quality of finish is flawless. Where parts screw together, the alignment is perfect in every possible way. The case is strong, clean and surprisingly light. A comment about the packaging...the person who packs this thing for shipping is an artist. I found that not in any area of this product construction or shipment was there a single short cut taken. This thing is just amazing.

  3. Shipped to Italy

    Posted by Marco on 15th Feb 2014

    Ordered it around the 22 of January. Took exactly 10 days to build because of the double color scheme . I chose the fedex shipping and that was the fastest economy shipping i've ever seen from America , 5 days and the baby was home. No damage to the enclosure neither to the box what so ever . Perfect construction with 2.6mm thick alloy and 1.5 for the exterior panels. Extremely cheap both shipping (around 120$) and customs (I payed 75€) . If I could i would buy another one without any doubt !!!! A M A Z I N G

  4. Something - Something

    Posted by Larry Alexander on 18th Jan 2014

    Like a lot of others did a lot of research on the CaseLabs Cases, watched a lot of videos on you tube concerning the quality and read a lot of the build logs on CaseLabs cases. Made a decision to do the build in a Magnum 8 case. The decision was long process several mnths of planning and asked a lot of questions prior to placing the order. the questions all had a quick response. Installing two Black Ice SR-1 120.3 radiators in the top of the case with the fans above the radiator mounts for a push configuration. You will need the 33 mm top if you decide to go this route. The reason I did this orientation on the raditors doing a single loop. There is a round whole in the top front centere mid plate the fittings from the radiator was in alighnment for the whole to run the tubing threw. It is a snug fit and off a little bit how ever with different radiators it may be a perfect fit. The tubing is not a hard install used compression fittings. You can mount another 120.3 radiator in the flex bay side in the front of the case. Instead decided to mount a Black ice SR-1 240 in the front Flex Bay side. This will leave plenty of room in the front bottom of the case to mount a pump or pumps if you choose too. There is enough room between the radiators top and front to mount a Aquaero Pro 6 or a similar fan controller it is a tight fit you may want to drop the radiator in the Flex Bay side down to the bottom fit in front of the case. You can add a 120.3 or a 120.2 radiator in the bottom on the PSU side decided to leave that area open for cable management. With a 120.3 radiator mounted in the top of the case on the PSU side you will not be able to mount a 120 mm x 25 mm fan in the top front. You do not need a fan in that location the radiator and fittings will restrict the air flow anyway. I did mount a Rampage Three Black Edition on the M/Board tray and it fits perfectly the M/Board does not hang over on the tray. Set but did not mount a 120.3 Black Ice GTX radiator again in the bottom of the case on the M/Board side just to see if it would give enough clearance. You will have issues with the screws that hold the casters. 4 Velocity Raptors and 1 Caviar Black hard drives leaves room to mount two more hard drives. There is plenty of room in the top of the case droped the hard drive racks to the bottom of the case.
    Did a international shipment Ground using FEDX the case was shipped half way around the world into Asia. The delivery was on time. CaseLabs notified me with a tracking number to FEDX. There was two dings in the box that can happen with any carrier. The case came fully assembled.
    CaseLabs does not send a installation manual with this case. it is very straight forward and extra hardware you order is in a separate plastic bag including a smaller plastic bag inside to hold the screws. Each bag is labeld with name and part number so installation with a manual is not required. The only complaint I have is the USB 3 sleeving at the front of the case could use some improvement it is not too bad. The vandal switches sound like Lamptrons and have a very firm click to them. The standoffs for the M.Board is in a package and had exactly enough to mount the M/Board so recommend you order 1 extra package in case you loose one. Expected the Standoffs to be mounted and a extra bag shipped not so with this case. Some people have complained about the doors sticking and being a little difficult to open I did not find that issue. All the panels fit perfectly extremely easy to mount radiators fans and hardware in. There is not any flex in the frame this is very strong case. Will say this case has adequate room unless you plan on extreme water cooling. Consider 2 x 120.3 Radiators and 1 120.2 radiator advanced cooling set up. This case offers so much flexability you can do a extreme water cooling build in this case with all of the options available from Caselabs.



  5. Universal MAGNUM M8 built by CASELABS

    Posted by Andy Keller on 8th Jan 2014

    The MAGNUM M8 built by CASELABS gives many high-end PC component installation possibilities and provid excellent customer service from the day I ordered it to the day it was delivered. What is still boggling my mind is to have the entire motherboard and the closed circuit water/air cooling system including the graphics card(s) slide out altogether! I hope to come up with a satisfying solution and will report my findings with some pictures to CASELBS in the near future.
    My special thanks go to Kevin and all CASELABS members.

    Syncerely, Andy Keller

  6. A very well deserved reputation for quality far above anyone else.

    Posted by Pete on 7th Dec 2013

    Executive Summary:
    Case required with room for big gfx card, watercooling & lots of drives. Found CaseLabs, chose Magnum M8 - BACK OF THE NET!!! Get one, you *won't* regret it :o)

    Long Version:
    I wanted to upgrade my graphics card and my existing case just wasn't big enough to handle one of these new monsters. I also wanted a case that would hold 7-8 drives without having to spend weeks trying to figure out how to shoehorn them in without frighteningly sharp bends in SATA cables and everything bashing into everything else. I wanted to do some overclocking as well, so thought a watercooled rig would be better. Anyway I stumbled across CaseLabs via lots of YouTube video's featuring their products. Wow! Some tasty kit... hit the website & checked them all out before settling for the Magnum M8 in black.

    My M8 arrived in the UK via FedEx (another thumbs up for them too) packed in a nice thick, sturdy outer box, styrofoam sheets & a thick plastic "bodybag". The extra's and parts that came with it were safely bagged, bubbled and stored in a huge wad of paper inside the case, so there was no chance of damage to them or the case interior.

    I was so impressed by the quality I made a point of scrutinising the whole shipment. Not a single blemish on the immaculate matte black finish, not one smudge, scratch, blob of paint, thinly sprayed area, swarf, rough edge, bad fit, dent or misalignment. That applied to not just to the case, but every component, screw & strut! The way it has been designed, fabricated and assembled is nothing short of IMPECCABLE! And it looks very stylish and distinctive to boot :o)

    It was a joy having enough space to work inside the chassis, not having to worry about slashing your wrists on sharp edges or about how the heck I'd get something in there. This case is so versatile you can do just about anything you can think of. However you will need to set aside a little time just to slide the tech tray in & out & gently tighten thumbscrews up just because it feels so good! Big kid or what! :o)

    If you want to build a positive pressure system to prevent dust build up then, even if you seal things up pretty well, you will still need fans that can maintain pressure on the input side, so my build isn't the quietest that could be made. If I had some fabrication skills I'd be making a custom bridging plate between the rad and the case that would seal the gaps at either end, but sadly I never got beyond the "I've broken it" stage in metalwork...

    Anyway, my Magnum M8 swallowed the following without even batting an eyelid, and could have taken a whole lot more:
    - Asus P8Z68 Deluxe/Gen3 mobo
    - Core i5 2500K with XSPC Raystorm block
    - EVGA GTX770 with XSPC cooling block
    - XSPC EX360 Radiator & 2Bay res with D5 pump
    - Lamptron Touch Fan Controller
    - DVD RW
    - 6 HDD's & 1 SSD (got an extra HDD rack)
    - 8x 120mm fans - 4 input, 3 output in a push config on the radiator in the hole above the mobo compartment, so including the Power Supply fan, that's 4 out
    - a strut & 120 fan holder to place a fan facing into the chipset & memory area of the board to blow air across them in the absence of the CPU fan
    - 4 DEMCiflex 120mm black round filters that fit perfectly over the input fan holes, so are hidden behind the front panel
    - Two white LED lighting strips along the top of each compartment controlled by a switch 'cos finding stuff in a black case isn't easy without lights.

    So, the proof of the pudding is in the build and, as I type, this lovely black work of art is sitting beneath the desk humming away to itself, with a subtle blue glow from the Power switch and nice red blips from the HDD/Reset button. Thanks CaseLabs!! I love it!

    Right, now... Minecraft, Folding@Home or ARMA?... ;)



  7. Very pleased with this case.

    Posted by Ross Monge on 23rd Sep 2013

    I looked at reviews and studied cases for weeks before decided to purchase this case. I had a few important features i wanted out of a case. Be able to use a case for 10+ years, easy to modify and evolve over time if needed, top notch build quality, modern aesthetics with great looks. This case fit all those for me. Im very happy with my purchase. Very well packed for shipping and for a custom built case it was shipped in a timely manner.

    Thanks CaseLabs!

  8. Best case ever!

    Posted by Sebastiaan Beckers on 5th Sep 2013

    I've had many cases before but none were so good as the M8! Such excellent build quality, perfect finish, easy removable parts, spacious design, and the flexibility.
    I only have one UT60 360 radiator in and I still have enough room for 2 more.

    One thing to think about is: plan ahead! Think about what you want in the case and where, then sift through the huge list of accessories and buy it! You will be very happy. And if you're not order some more parts :D

  9. A STEP ABOVE THE REST

    Posted by Thomas Martin III on 31st Aug 2013

    What can I say that everyone else hasn’t already said. Sure the price is more that what most people spend on an entire system, but you truly get what you pay for here. Caselabs cases are in a league of their own and for the true enthusiast, this is a must have for your water cooling needs. It's not only a beauty to look at, but the possibilities are endless on what you can do with them.

    In short, if you're thinking about going to watercooling get one of their cases. Dont think about it, just do it. Thanks Caselabs and keep up the fantastic work.

  10. A water cooling wet dream!

    Posted by Unknown on 12th Jun 2013

    Its almost a mid-tower. Really pretty, even with 3x240mm, 2x360mm Rads you don't lose your 5.25" front bays or 3.5" internal bays. All the holes line up, its a dream to work with. Its a gorgeous case, check out my build log.
    http://www.overclock.net/t/1400009/rons-caselabs-m8#post_20175255

Showing reviews 1-10 of 31 | Next

Find Similar Products by Category

Related Products