Site Information

 Loading... Please wait...
  • Image 1
  • Image 2
  • Interior of motherboard side
  • Rear
  • Interior of PSU Side
  • Integrated top radiator mounts
  • Integrated bottom radiator mounts
  • Standard and Reverse Front View
  • Ventilated MB Door - Standard Case
  • Ventilated PSU Door - Standard Case
  • XL Window Option
  • Shown with Solid Panels
  • Standard Ventilated Top Cover
  • 31mm Extended Top Cover
  • Image 15
  • HDD Cage Options: MAC-102 Flex-Bay Mount (left) and MAC-101 Standard Mount (right)
  • Color Options

MAGNUM M10 Case (discontinued)


Product Description

This case has been discontinued and replaced by the M8A.

Case Features:

All Aluminum Construction
The Flex-Bay System
The Accessory Mounting System
Integrated Horizontal Radiator Mounting
Dual Chamber Construction
Quick Release Exterior
Anti-Vandal Switches with Black Sleeved Cables
Removable Motherboard Tray and Mini Tech Station


Technical Specs  
Base Price (US Dollars) $439.95
Flex-Bays (5.25 bays) 10
PCI Slots 10
Motherboard tray size                               (width x height) 10.63” x 13.69" (270 x 348mm)
Native HDD Locations 4
Native SSD Locations -
Total possible HDD locations with extra HDD cages (using additional mounts, purchased separately) 24
Total possible SSD locations with extra SSD mounts (using additional mounts, purchased separately) 48
PSU Mounting locations 2
Weight (Pounds) 19
Optional Front I/O Panel Yes
Compatible Motherboard Form Factors  
mITX Yes
mATX Yes
E-ATX (dual CPU) -
E-ATX (Revision-M) -
Exterior (width x depth x height)                                                 (dimensions shown are for the case only. Rubber feet add .75’’ (19mm) to height, optional standard casters add 2.6’’ (67mm) and HD Casters add 3’’ (76mm)) 15" x 20" x 19" (381mm x 510mm x 484mm)
Motherboard chamber dimensions (width x depth x height) 7.6" x 19.4" x 18.4" (194mm x 494mm x 468mm)
PSU chamber dimensions (width x depth x height) 5.6" x 19.4" x 18.4" (143mm x 494mm x 468mm)
Maximum Radiator/Fan clearance above motherboard tray with standard height top cover 59mm
Maximum Radiator/Fan clearance below the motherboard tray 52mm
Cooling Tower Clearance (air cooler) 180mm


 Note: Exterior dimensions shown are for the case only. Rubber feet add .75’’ (19mm) to height, optional standard casters add 2.6’’ (67mm) and HD Casters add 3’’ (76mm)

 ** "E-ATX" motherboards such as the ASUS RAMPAGE V EXTREME will fit in this case. E-ATX motherboards such as the Supermicro H8DG6 will not fit in this case. Please cross reference the motherboard tray size with the motherboard dimensions from the manufacturer.




Case Features and Included Accessories  
All Aluminum construction Yes
Flex-Bay System Yes
Accessory mounting System Yes
Quick Release Exterior Yes
Flex-Bay 5.25 Device Mounts - Standard (MAC-125) 4 sets
Integrated Radiator Mounting               (beyond 120.1/140.1) Yes
Side Radiator Mounting Yes (optional)
Dual Chamber Design Yes
Slide out motherboard tray with tech station conversion kit Yes
Anti-Vandal style power and reset switches with MDPC-X sleeved cables Yes
Compatible Radiator Sizes (may require additional mounts)  
120.1 - 120.2 (120 - 240) Yes
140.1 - 140.2 (140 - 280) Yes
120.3 (360) Yes
140.3 (420) -
120.4 (480) -
140.4 (560) -
120.9 (1080) -
140.9 (1260) -
180.3 (540) -
180.4 (720) -
Shipping Format: Domestic  
Flat Packed -
Fully Assembled Yes
Shipping Format: International                  
Flat Packed -
Fully Assembled Yes




Product Reviews

Write Review

  1. Awesome Case

    Posted by EK on 23rd Dec 2014

    Got my case from the legends at Case Labs...Very Very Happy. I needed a case that could fit in a height restricted location, yet still have the ability to house a load of HDs and Radiators. Currently working on my build. It was an expensive option, but if you want the best (And CaseLabs most definitely is!!) you have to be willing to pay. The guy I was dealing with via email was super helpful and responsive. The build quality and sheer flexibility of the Magnum M10 is outstanding - would highly recommend! I am based in Europe, I just wish Case labs had a distributor in Europe! To sum up, if your in the market for an outstanding new case for a water cooled build - buy Case Labs!

  2. Incredible Quality

    Posted by Greg on 21st Oct 2014

    M10 - Gun Metal exterior, White Interior, White Flex bay vented covers, and White I/O Panel.

    Overview of process: Ordered on September 16, received October 16th at my door step. Caselabs sent me and email and told me they were experiencing some delays and I was totally fine with it. I spent many months researching the forms and there web site for information on the M10 and other cases that they sell trying to figure out what I wanted to go with. I finally decided to order the M10 double wide since I really liked the look and all the options for drives and water cooling radiator locations. NOTHING could prepare me for the M10 once I got it opened and pulled out.

    Pros: - the best packing job that I have ever seen...
    - M10 is Incredible!!!! Gun metal and white powder coat looks great!
    - Removable Motherboard tray!
    - Just a well thought out design
    - Fit and Finish are second to none
    - Double Wide just works so well!
    - Again pictures on the web don't do justice for the build quality of Caselab products.


  3. Disappointed

    Posted by Gary C Carter on 12th Aug 2014

    Well from ordering to receiving it was about 12 days. Really quite quick for all the work put into the case. I just finished installing board, cards, drives. Amazing how much room there is for future upgrades. I didn't purchase the case for radiators, water cooling and gaming. It will be a continuation to my home server. My disappointment is that the case already came fully assembled. I was under the impression everything was flat packed. I get a lot of satisfaction out of piecing things together. Other than that it fits perfectly in it's new location. Thanks!

    [CaseLabs: Thank you for your purchase! The original Magnum cases (M8 & M10) are riveted together, so they can only be shipped fully assembled.]

  4. Build quality great, but...

    Posted by Mark on 2nd Jun 2014

    First let me say that this is a really nice case with very good build quality. Almost infinite cable routing options. Plenty of spare parts and extras for many use cases.

    However, a number small issues leave me less enthusiastic about the case after receiving it than when I ordered it (and less so than other reviewers here).

    I needed a case that would hold a lot of disk drives and there aren't a lot of cases that get you beyond 6-8 (I started with 14 and will expand to at least 20). This case can do that no problem. However, after actually doing the install, the drive cages, the way they align to the case, and the fan mounting are clumsy at best.

    Both styles of drive mounts provide good support and isolation for the drives. However, my issues with the mounts are:
    - the mounts install from the *inside* of the case
    - the mounts have no cutout/channel for the fan wires (Vortex Cougar). So the wires stick out (partially pinched) where ever they can
    - Aligning the completed cage into the case requires aligning tiny pins on the case into rubber grommets on the cage. This is mostly a blind operation due to the location of the pins. The rubber grommets are easy to dislodge from the cages.
    - Cage filters are not supplied but available. I have not added these yet, however, for it to look good, the filter will have to be mounted inside the cage in front of the fan. To clean these fans will require removing the cages (including cable removal) in order to access the filters. A lot of opportunities for re-installation errors.

    - The PSU mounting bracket is basically useless since it does not align with the bottom of the PSU to help support the PSU weight. About a 1/4" gap between them (Seasonic X-1250).

    - minor nit about the power/reset panel, the USB cables are not labeled for which cable is the upper pair vs lower pair of USB connections.

    [CaseLabs: The PSU Mount is designed to sit 1/16" below the the PSU to provide space for the foam padding tape that is provided with the kit.

    A small amount of lubricant on the grommets can greatly simplify the installation of the cages if you're having difficulty.

    In general, contacting our customer service department is a quick way to help deal with things like this and save frustration - thanks!]

  5. Five stars, despite one tiny issue.

    Posted by Aaron Montgomery on 18th Feb 2014

    First off, this is a fantastic case. I am almost ready to start building, just waiting on a couple more parts to come in, and I can't wait to get started! I love the modularity and build quality, except for one area, which is that my rear left corner vertical frame on my chassis was bent somewhere along the line, whether in manufacturing or shipping, I don't know. With the panels on its not noticeable, it's pretty small even with the panels off... Nitpicky I know, but for the price, I feel it's alright to mention small errors.
    [URL=]Here's[/URL] a pic if anyone is interested. It doesn't effect the rating though, still a definite 5 stars!

    Otherwise, the build quality is amazing, the powdercoating is spotless, and the best part of all is that big shiny "Made in USA" sticker on the box! Thank you for keeping it in-house, I have a ton of respect for that, I try to buy American where I can and it's getting really hard.

    Also, note this: I got two XSPC AX360 rads for the top, to mount above the chassis with fans below inside the case as well as above the rads, and the rads don't quite fit in that configuration. The fittings for the lines catch on the mounting tabs on the case, by just enough to prevent the screws lining up.
    Not at all CaseLabs fault, or XSPC's for that matter, just a non-compatibility for you to be careful of. A Dremel will fix it, just a couple millimeters off the rear corner of the rear-most mounting tabs.

    Overall, a great buy, and one that I wouldn't hesitate to make again... But I don't think I'll ever need another.

  6. Amazing build quality

    Posted by Zach on 11th Oct 2013

    Best case I have ever owned, so easy to work with. Fantastic customer service.

  7. best cases on the market

    Posted by joshua waddle on 5th Oct 2013

    amazing customer service,even better case. while looking kinda plain,these cases are by far some of the best quality on the market. will absolutely recommend these to others. 5 stars!

  8. The best I've owned.

    Posted by Erick A. on 11th Apr 2013

    I've been looking for a case that could fit additional water cooling equipment without having to have some 4' monstrosity on my desk. In addition to the volume and amount of configuration these cases offer CaseLabs took alot of time in plotting some very simple but neat functions such as the slide off doors, the slide out tech station for your MOBO, and the Flex Bay System opens up even more options.

    The only way to make this case any better is if it had Flex-Bays on both sides which would mean a little wider case, but for someone buying a case this size I dont think a few inches really matters. It would be the only case you'd ever have to buy.

  9. Amazing Product

    Posted by Patrik Manni on 21st Mar 2013

    This is a truly great case into even the smallest details, and clearly shows thought has been put in. The customization options are endless and astounding, and I will definitively be buying accessories and additional fan mounts to play around with different configurations.

    Do note that the 'Fan Hole' back plate has 4x40mm fan mounts, and not 3 as shown above. However, I would personally argue that the new configuration brings a more balanced look to the back of the case. The fan holes also come with a cover bracket in case you don't want to use them.

    Definite buy for anyone looking for an extreme water-cooling case. Great build quality, amazing finish, more options than you'll know what to do with. Packaging was also great with the case wrapped neatly in a large, thick plastic bag, and held in place with foam brackets.


    Posted by Paul brunelle on 1st Mar 2013

    I love this case it was over my budget but it was well worth it. If you are looking for a case, this one is the one for you.

Find Similar Products by Category