These are short 5.25'' Flex-Bay device mounts for NONCONFORMING devices. These mounts should ONLY be used if you have a device that requires these very specialized mounts. A nonconforming device would be one that is wider than the standard 5.25'' bay specification. Please note that the width of the faceplate on these devices does not determine the overall width of the device. The width is determined from the mounting points on the sides of the device. Uses 1 bay and is included with:
- 4 x 6-32 screws
- 4 x M3 screws
- 2 x thumbscrews
- 6 x ~.5mm thick shims
These mounts will be included with 6 shims (each shim is ~.5mm thick). The device needs to be shimmed out so that the overall width (with these mounts installed) is 152-153mm. Please see the pictures below.
Customers also viewed
Works well with AquaComputer Aquaero 6
Posted by Jubijub on 22nd Jul 2017
I bought this to be able to mount my AQ6 Pro in the flexbay. The AQ6 is a little bit narrower than the standard mount, and thanks to the little sheets of metal supplied with this non-conforming version, I was able to pad the brackets so they match exactly the size of the flexbay, without having to bend the AQ6 own brackets.
Does as it says on the tin.
Posted by Rudi on 12th Oct 2015
Not only can you center it, you can also move it forward so now my fan controller sits center and flush with the front of the case.
Nice touch once again. simple and exactly what I needed.
Posted by Anthony Anderson on 2nd Apr 2014
I tried it without the shims, it's a little off, added one of the shims to each side, still a little off. Ended up moving it to a lower bay, looks pretty centered. Takes a little adjustment to get it flush but it's not rocket science. Well worth it to use with my Aquaero 6.